![]() Any item that is not packed in an outer shipping carton will be refused and credit will not be issued. Units to be returned should be carefully packed. ![]() Any open non-defective merchandise returned will be charged a 15% restocking is not responsible for shipping costs or damage on returned items. Any shipping and/or handling charges on the original order cannot be refunded. Return requests must be made and the product must be received at our warehouse within 30 days of the RMA date. with the authorization RMA# clearly printed on the outside of the package. Email us at to obtain an RMA# from a representative.For orders purchased from a reseller, other than X10.com, we ask that you contact the seller directly for all warranty claims, returns or exchanges, under the warranty guidelines described below.All returned merchandise must be in the original packaging including manuals, accessories, cables, etc. In order to return or exchange (under the warranty guidelines described below) all or part of your order, you must contact us for a Return Merchandise Authorization number (RMA#). Dimmable LED Bulbs should be 60W equivalent or higher.Īll orders purchased from X10.com may be returned within 30 days for a full refund. But, if unacceptable hum occurs, use the XPS3 wall switch module to provide X10 ON/OFF control only. Unfortunately, there is no way to determine whether hum will occur without actually trying it. Magnetic transformer loads usually do not generate noise, but may generate hum with some fans or motor loads. ![]() If you're planning on using this switch with electronic low-voltage transformers, we suggest you also use a in-line noise block to eliminate the noise usually generated with this combination. If your incandescent or halogen lights aren't working and dimming properly with two-wire dimmer switches, this three-wire switch will usually solve the problem. Note: Neutral wire required for inductive dimming.Ĭompatible with X10 Pro Companion (slave) Wall Switch for 3 and 4-way circuits (XPSS) What's Included: (1) X10 PRO Dimmer, (1) Set White & Ivory Rocker Switches A power cut off is located directly below the switch for safe and easy bulb changes. Please consider that lamps rated below 60W may flicker or operate erratically with this switch and should not be used. This switch may be used in single pole applications, simply cap off the red traveler wire. The XPDI3 Pro Switch can be used in 3-way and 4-way applications with the addition of one or more XPSS X10 Pro Companion Switches. ![]() It can be paired with your current switch plate or one available at any local hardware or big box store. XPDI3 X10 Pro Inductive Dimmer Wall Switch Module replaces your standard wall switch for complete local and remote X10 control of lighting and fan speed and allows you to integrate your fans and low voltage incandescent fixtures into your home X10 system. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |